1. Programmed intelligent digital controller for two-stage inflatable and LCD display.
2. The main components are made of marine engineering ABS and nylon materials, which are durable.
3. In the first stage, the maximum speed is 350L/min; in the second stage, the maximum speed is 70L/min, the pressure setting is increased by 0.5 PSI, and the maximum support is 20PSI.
4. Built-in sand filter for intake and pump cooling system.
5. Ultra-light weight 4 pounds, small size, easy to carry.
Net weight: 1650g
Gross weight: 1850g
Inflation range: 0-20 PSI
Pneumatic Slurry Plate: Full-in-one High Pressure Pump
High Pressure: Inflation + Exhaustion
Pump support rate: 0.5-20 PSI (0.034-1.378 Bar)
Accuracy of digital sensor: 0.01 PSI
Controller Method: Preprogrammed Digital Controller Board
Maximum pumping speed: 350L/min in the first stage, 70L/min in the second stage
Pump Stage 1: Sealed and quiet turbofan for high capacity inflation
Pump Stage 2: Engineering Cylinder Compressor for High Pressure
Switching point of double inflator: 0.65 PSI
O-ring thickness: 0.3mm/0.5mm/0.6mm
Sand filters: dual filters for intake and pump cooling
Pump operating voltage: 11-14V DC
Maximum energy consumption: 10A, 110W (12V)
DC power line length: 9 feet (2.75m)
Air hose: 4 feet long, with HR valve adapter
Please allow 1-3mm differs due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
1 x Air pump
1 x Hose
6pcs x Air nozzles
Please follow and like us: