100w solar panel packing list
1pcs 16v 100w solar panel
200w solar system packing list
2pcs 16V100W solar panel
1pcs 12V/24V 20A controller
1set 3 meter cable with solar PV connector
1 set 1meter cable with battery clips
1pair 2 in1 PV adapter
400w solar system packing list
4pcs 16V100W solar panel
1pcs 12V/24V 30A controller
1set 3 meter cable with solar PV connector
1 set 1meter cable with battery clips
1pair 4 in1 PV adapter
Our high-quality solar panels, controllers, inverters, and power accessories offer a durable, dependable, and cost-effective solution for mobile power needs where grid power is inaccessible, unavailable, or unsustainable
Complete off-grid solar power solutions for recreational installations. Off-grid solar system is one-stop shopping for your RVs and Boat. The whole set includes solar panel, controller, cables, connector, just plug and play! 18V 100W solar panel connected in parallel or series to charge the 12V or 24V battery
Details



Products Parameter at Standard Test Conditions
Max Power : 400w
Max Power voltage : 16V
Max Power Current : 6.25A
Open Circuit Voltage : 19.2V
Short Circuit Current : 6.875A
Maximum System Voltage : 600V
Cell size : 125*125MM
Max Power tolerance : ±3%
Temperature coefficient of Pmax : -0.38%/℃
Temperature coefficient of Voc : -60.5mV/℃
Temperature coefficient of Isc : 2.2mA/℃
Dimension : 1050*530*3mm

Safety Instructions
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Note
Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!



Owen –
Fantastic!
Nathaniel –
fantastic
Kai –
Good communication!
Rob –
I love my new product.
Martin –
Good job!
Roger –
Great Job
Fiete –
Thanks for that good product!
Patrick –
nice, everything good
Filip –
The product is firmly packed.
Ryker –
Good service.
Roger –
Very good shop, i will come back!
Robbin –
Thanks for the good service!
Marlin –
Fast shipping to my country !